1 / 4
Rectangular Metal Logo Bars with Punched Rivet Holes
MODEL ML014
Flat bars with two punched holes, riveted through a bag flap or stitched under a strap. The gallery shows gold, silver and black nickel on leather, with the shadow line kept tight so the bar sits flush. Bars like these work as Metal Bag Labels, as Custom Metal Logo Plates for Garments on heavier panels, and as plain nameplates for luggage. Thickness runs 0.8 mm for flaps and 1.2 mm where the bar takes load. A Bag Metal Logo Manufacturer should be able to advise which one your panel needs.
Production capability
From mould making to packed carton, in our own factory
Everything below runs on our own floor in Guangzhou — mould making, die casting, trimming, polishing, plating, inspection and packing — so the finish approved on the sample is the finish that ships in bulk.
14+Years of metal hardware manufacturing
20M+Pieces produced every month
12Automated process steps in house
Multi-step machining, automated
-
01Die casting -
02Automatic feeding -
03Automatic separating -
04Automatic sorting -
05Automatic trimming -
06Mechanical polishing